Best Commercial Air Conditioning: Cooling Towers in Conroe, TX

If you are looking to install a cooling towers in your business, there are several different kinds to choose from. Some of these include cross-flow cooling towers, heat exchangers, chillers, or evaporators. We will give you some information on the various types of cooling towers used in commercial air conditioning systems. Ultimately, you will be able to select the one that best suits your needs. We will guide you through the process of choosing and installing the perfect cooling tower for your company’s air conditioning system.

Heat Exchanger

A commercial cooling tower has many benefits. The water in the basin overflows periodically. This water is drained for maintenance purposes or periodically during normal operations. The water in the basin often contains dirt and salt. These impurities can cause the heat exchanger to malfunction due to overheating. You should check your cooling tower on a regular basis to ensure that the filtration is effective. If this component is not functioning properly, you can consider installing a high-quality air filtration system.

Commercial cooling towers have two main types of heat exchangers. Open cooling towers have a cold water collection basin at the bottom. This cold water is then pumped back to the condenser to complete the cooling-water loop. This process helps cool the entire building. Induced draft cooling towers are more efficient than forced draft models. The heat exchanger in a commercial cooling tower varies in size and complexity.

Cross Flow Cooling Tower

The main differences between a cross flow commercial cooling tower and a conventional vertical chiller are the size and construction of the plenum, the central section of a cooling tower, and the method of water distribution. A cross-flow cooling tower can operate efficiently even in cold weather thanks to its gravity-fed water distribution system. Water is evenly distributed throughout the fill of the tower, preventing water channeling and ice development that can result in unpredictable performance. This even distribution also reduces the potential for scale buildup and damage to the tower. The cross flow cooling tower can also be configured to keep heat load away from the weather-exposed side of the fill.

The performance of a cooling tower is dependent on the fill material used and the quality of the process water. Axial fans are more energy-efficient and sit atop the tower, while centrifugal fans are commonly used in forced-draft fluid coolers. The type of fill material used depends on the size and chemistry of the process water, as well as the potential for biological growth. Cooling tower manufacturers often publish guidelines that help determine the quality of process water sources.

Heat Exchanger with Chiller

A cooling tower has many parts, including a chiller. The chiller, also known as an air-to-water unit (AHU), is typically located on the roof or basement of a building. The purpose of a chiller is to cool the building by moving air through coils to cool it. The water that passes through the coils is called chilled water. In some applications, chilled water may be hot to the touch.

Commercial cooling towers contain a large water-cooled chiller. These units contain a condenser and an evaporator, which are connected by pipes. These components function as a large heat exchanger and help condition the air in large open spaces. Water-cooled chillers are used for commercial applications where cooling towers are too large to provide sufficient air conditioning. A chiller is often placed on the roof or base floor of the building to ensure proper heat dissipation.

Heat Exchanger with Evaporator

If you have a cooling tower, you’re probably aware of the different types and construction variants available. Choose the right type for your application and size of air conditioning system. Package type cooling towers are assembled in a factory, and field-erected cooling towers are installed on site. The size of the cooling tower is determined by the number of evaporators and the size of the cooling tower itself.

A well-designed evaporative tower will provide water with a high surface area for heat exchange. This is vital for latent heat exchange to occur. Specially designed heat exchange surfaces are needed for this purpose. In addition to this, a properly functioning fan is necessary to move a specified volume of air. Finally, the internal components of the cooling tower are essential.

Looking for a commercial AC company for Cooling Tower installation in Conroe, Texas?

Omni Air & Heating LLC can help you with all your commercial HVAC needs. Whether you’re looking to install a new HVAC system or need repairs or maintenance, we can get the job done. For your peace of mind and safety, we only use certified air conditioning technicians who are employees of our company. We strive to be the best AC contractors in the community. Our customer service is unmatched.

We are a family-owned and operated company with more than 30 years of experience in the residential and commercial HVAC industry. We work tirelessly to provide our customers with a competent and reliable service that leaves them satisfied, happy, and confident enough to recommend Omni Air’s services to others. We want you to be happy with the services we provide, so get connected with our commercial air conditioning experts in Conroe, TX by calling (281) 767-OMNI to schedule a consultation. Take advantage of our services before the hot summer season gets underway.

Follow us on Social Media:


Submit a Comment

Your email address will not be published.